Ultimaker 3 Cleaning Filament

Ultimaker 3 cleaning filament has been engineered to clean and unclog print cores to keep
them in optimal condition.

Print cores can become clogged with extended use. Ultimaker recommends thoroughly
cleaning print cores every few months, to keep them in optimal condition. If your Ultimaker
3 is extruding slowly or not all, the print core may need cleaning.

Ultimaker 3 cleaning filament can be used to unclog any material from the Ultimaker 3’s
print cores. It will unclog PLA, ABS, CPE, CPE+, Nylon, PC, TPU 95A, PP and PVA. It works in
two ways:

1) With a hot pull, which melts the filament in the print core

2) With a cold pull, which removes any remaining particles to thoroughly clean the core.

This filament can be used to clean the Ultimaker S5 and Ultimaker 3 print core by applying hot and cold pulls. Hot pulls are used to get the biggest parts of carbonized material out of the print core and are highly recommended when the print core is clogged. With a cold pull, the remaining small particles will be removed, ensuring the print core is completely clean.

Each order includes 10 pieces of cleaning filament

To find out more about Ultimaker 3 cleaning filament, contact us today.

Subscribe to our mailing list

* indicates required